Aquapol System Construction

Internally the Aquapol device is a smart system of receiving and transmitting antennas, consisting of 3 main parts:

Construction of the Aquapol device


1. The receiving unit
: situated at the bottom of the device, will capture certain wavelength from Earth’s natural energy field, in a conic shape. This unit is basically a filtering system which by design will only let through those specific wavelengths which can influence the water's migration inside the wall capillaries, and will filter out everything else. More about this in the next section.

2. The polarization unit: is an amplifier, will amplify (polarize) the useful waves.

3. The transmission unit: will finally project the useful waves onto the surrounding walls, resulting in the cancellation of the capillary forces inside the walls and the dehydration of the masonry within the active range of the device.

Aquapol energy input and output

Energy input (blue) and output (green) areas


Similar to a low power crystal radio1, the Aquapol device does not use any conventional electricity for its operation; it will power itself from the energy waves captured through its antenna system.

The devices come in various sizes; their radius of action covers all walls within a range of 50 to 400 m2.

[1].http://en.wikipedia.org/wiki/Crystal_radio

.
.

Watch The Video

Watch this short 1 minute overview of the Aquapol wall dehydration system.

.